PROTEK SRS Drill Interrupter - Specifications

Helps Prevent Broken Pipes and Conduit	Interrupts the power to a rotary hammer drill instantly when the drill bit encounters grounded metal pipes, conduit, or reinforcement steel.  Excellent for use when drilling concrete slabs or walls during construction or maintenance activities.
Tested and Inspected	Each PROTEK undergoes thorough factory inspection and testing before shipment.
Easy To Use	Ground and Trip indicator lights. Plug drill into PROTEK, test against grounded metal pipe, and start drilling.
Built-In GFCI for Operator Safety.	OSHA recommends that a Ground Fault Circuit Interrupter be used when operating power tools.
Rugged Design	Sturdy compression-molded fiberglass housing. Double-relay / active and passive safety shunts. Heavy-duty, chrome handle. Extra-heavy-duty circuitry. Rated at 15 amps, 115 volts, AC Approximately 7.5" x 4.5" x 3" Weight: 8 pounds
One Year Warranty

-- Control Loop --
When the drill bit encounters grounded metal, the Control Loop is completed (closed), and the PROTEK stops power to the drill. All segments of the Control Loop must be in place for the PROTEK to function properly. If the Control Loop is interrupted at any point, the PROTEK will not shut off power to the drill when the drill bit encounters grounded metal.

A schematic diagram and replacement parts list is available on our support page.

(888) 658-8030 - Technical Support

Home | Distributors | Specifications | Service | FAQ